Samsung HC P4241W - Manual (Page 37)

English - 37
O P E R AT I O N
Setting the Signal Source
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment, such as
VCR, DVD, Set-Top box and the TV source (broadcast or cable).
2
Press the ENTER button to select
“Source List”.
Press the … or † button to select a
signal source, then press the ENTER
button.
Press the EXIT button to exit.
TV Source List
Move Enter Return
TV
AV1 - - - - -
AV2 - - - - -
AV3 - - - - -
S-Video - - - - -
Component1 - - - - -
Component2 - - - - -
1
Press the MENU button.
Press the ENTER button to select
“Input”.
œ When you connect equipment
to the TV, you can choose
between the following sets of
jacks : “AV3”, “S-Video” on the
TV’s side panel or “AV1”, “AV2”,
“Component1” or “Component2”
on the TV’s rear panel.
TV Input
Move Enter Return
Source List √
Edit Name √
Alternate method:
Press the SOURCE button on the
remote control repeatedly to select
an external signal source.
AV1
BP68-00399A-00Eng 7/5/04 10:59 AM Page 37