JVC HR-S8700EU - Manual (Page 32)

Filename [HRS8700EU2.fm]
Masterpage:Left
32
EN
Page 32 July 20, 2000 4:31 pm
TIMER RECORDING (cont.)
Express Timer
Programming If you do not know the S HOW V IEW number for the programme
you wish to record, use the following procedure to set your
recorder to timer-record the programme.
A
Access the S HOW V IEW screen.
Press PROG.
B
Access the Programme screen.
The front display panel looks like this:
C
Enter the programme start time.
The front display panel looks like this:
D
Enter the programme stop time.
Press STOP+/– to enter the time you want recording to
stop.
● Press and hold STOP+/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
E
Enter the programme date.
Press DATE+/–.
● The current date appears on the TV screen. The date you enter
appears in its place.
Before performing Express Timer Programming:
● Make sure that the recorder’s built-in clock is set properly.
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Turn on the TV and select the video channel (or AV mode).
Press START+/–. (If you’re
just starting out, “P1”
appears.)
Press START+/– to enter the
time you want recording to
start.
● Press and hold START+/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
HRS8700EU2.fm Page 32 Thursday, July 20, 2000 4:31 PM