JVC KS-F545 - Manual (Page 9)

9
ENGLISH
Listening to a cassette
You can play back type I (normal) tapes.
1
Insert a cassette into the cassette
compartment.
The unit turns on and tape
play starts automatically.
When one side of the tape
reaches its end during play,
the other side of the tape
automatically starts playing
(Auto Reverse).
Note on One-Touch Operation:
When a cassette is already in the cassette
compartment, pressing TAPE
23 turns on the
unit and tape play starts automatically.
2
Select the tape direction.
Each time you press
TAPE
23, the tape direction
changes alternately
forward (TAPE
) and
reverse (TAPE ).
TAPE OPERATIONS
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically
ejects from the cassette compartment. The
source changes to the previously selected one.
If you change the source, tape play also stops
(without ejecting the cassette this time).
• You can also eject the cassette by pressing
0
while the unit is turned off.
To fast-forward and rewind a tape
To stop fast forward or rewind at any position
on the tape, press TAPE
23.
Tape play starts from that position on the tape.
Note:
When the tape reaches its end while fast-forwarding, the
tape direction will be changed automatically.
Press
¢
for more than 1
second to fast-forward the tape.
When the tape reaches its end,
the tape is reversed and playback
starts from the beginning of the
other side.
Press 4 for more than 1
second to rewind the tape.
When the tape reaches its end,
playback of the same side starts.
MODE SCM
MO RPT
EN09-11.KS-F545[EE]f-1 1/17/03, 7:47 PM 9