JVC RC-BF10 - Manual (Page 38)

3
Select the desired radio station. ( pages 19, 20 and 23)
4
Press .
Recording will start.
7 Quitting Recording
Press .
N O T E
• Do not press the other source buttons during recording. Another source will be se-
lected and recorded.
• The sound input level during recording is automatically adjusted.
• Do not pause the tape for more than a few minutes. Press to stop the tape instead.
Recording a Radio Broadcast
Before recording sound to a cassette tape, refer to “About Cassette Tapes” ( page 40).
Turn on the main unit, and then follow the procedure below. ( page 11)
1
Insert a cassette tape for recording.
Both ends of a cassette tape are unrecordable parts (leader tapes). Before start record-
ing, wind the tape past the leader part of the cassette tape.
2
Press to select “FM” or “AM”.
35
If a beeping sound disturbs your AM broadcast
Each time you press , the display toggles as
follows.
cut1 cut2
Select either item for better noise reduction.
2 1 4 3
PUSH
FM AM
To record an
FM broadcast To record an
AM broadcast “FM” or “AM”
Frequency
RCBF10_25_39.p65 04.8.17, 10:29 34