JVC HR-DD858EH - Manual (Page 64)

HR-DD858/J758E/EH
COPYRIGHT © 1998 VICTOR COMPANY OF JAPAN, LTD.
E/EH
Printed in Japan
0598HOV
* UN * VP
VICTOR COMPANY OF JAPAN, LIMITED
Auto Set Up
– referring to the display panel
The Auto Set Up function sets the tuner channels, clock, Guide Program numbers and video channel*
automatically.
BEFORE YOU START PLEASE MAKE SURE THAT:
Ⅲ
The TV aerial cable is connected to the ANT.IN jack on the rear panel of the video recorder.
Ⅲ
The video recorder's mains power cord is connected to a mains outlet.
Ⅲ
The video recorder is turned off.
Ⅲ
Load batteries into the remote control.
1
Press (recorder/remote) .
2
Press %fi (remote) to select the international telephone country code.
● If you have selected a country code other than 32
(BELGIUM) or 41 (SUISSE), go to step 3.
● If you have selected 32 (BELGIUM) or 41 (SUISSE), press OK (remote) and select the language code by
pressing %fi (remote), then go to step 3.
(Ex.) DEUTSCHLAND is selected.
International Telephone Country Code
SUISSE : 41 SUOMI : 358
ITALIA : 39 PORTUGAL : 351
ESPAÑA : 34 DEUTSCHLAND : 49
BELGIUM : 32 NORGE : 47
NEDERLAND : 31 SVERIGE : 46
GREECE : 30 DANMARK : 45
OTHERS : - - ÖSTERREICH : 43
Language Code
ENGLISH : 01 NEDERLANDS : 06
DEUTSCH : 02 SVENSKA : 07
FRANCAIS : 03 NORSK : 08
ITALIANO : 04 SUOMI : 09
CASTELLANO : 05 DANSK : 10
Language Code
(Ex.) FRANCAIS is selected for BELGIUM
International Telephone
Country Code
3
Press OK (remote). Do NOT press any button on the video recorder or remote control until the display panel
shows as follows.
● If you have connected the video recorder to your TV via RF connection, press OK to finish the Auto Set Up.
To view picture signals from the video recorder, set your TV to the Video Channel.
● If you have connected the video recorder to your TV via AV connection, press TV PROG – until the display panel
shows "–OUT– –" to set the Video Channel to off, then press OK to finish the Auto Set Up.
To view picture signals from the video recorder, set your TV to its AV mode.
* Once you have performed Auto Set Up, even if the recorder's memory backup has expired, the recorder will
not perform Auto Set Up again. Perform tuner setting (
੬
pg. 46), clock setting (
੬
pg. 54) and/or Video Chan-
nel setting (
੬
pg. 45) as required.
● If "– –:– –" appears on the
display panel, see page 6
of the instructions.
FOR MORE INFORMATION SEE INSTRUCTIONS/P4
EN
* Useful for RF connection users.
Video Channel