Connecting/ using a decoder – JVC HR-DD858EH User Manual

Page 43

The AV2 IN/DECODER connector can be used as an input
terminal for an external decoder (descrambler). Simply connect
a decoder and you can enjoy the variety of programming that is
available through scrambled channels.

SELECT INPUT MODE

Set "AV2 SELECT" to "DECODER". (

੬

pg. 37)

CONNECT DECODER

Connect your recorder's AV2 IN/DECODER connector

to the decoder's Euroconnector using a 21-pin SCART
cable.

SET TUNER

Perform the procedure as described in "When Receiving

A Scrambled Broadcast" on page 49.

NOTE:

When Connecting A Satellite Tuner . . .
. . . if you don't have a decoder connect the satellite tuner
directly to the video recorder's AV2 IN/DECODER connector.
. . . if you have a decoder, first connect the decoder to the
decoder input of the satellite tuner, then connect the satellite
tuner's output to the recorder's AV2 IN/DECODER connector.
Refer to the instruction book for the satellite tuner and decoder.
. . . set "AV2 SELECT" to "AV2". (

੬

pg. 37)

. . . to view a programme via the satellite tuner, select L-2 mode
by pressing NUMBER keys and/or TV PROG so that
"L-2" appears on the display panel.

Connecting/

Using A

Decoder

TV Receiver

TV
Aerial
Cable

RF Cable (provided)

AV1 IN/OUT

Satellite
antenna

Satellite tuner

Decoder

AV2 IN/DECODER

This manual is related to the following products:

HR-DD858E