JVC LVT1099-001A - Manual (Page 30)

30
ENGLISH
Changing general settings
(PSM)
You can change the settings for this unit by using
the PSM (Preferred Setting Mode) control.
Basic Procedure
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step
1 again.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See page 31.)
2
Select a PSM item you want to
adjust. (See page 31.)
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5
Finish the setting.
5
Adjust the minute.
6
Finish the setting.
To check the current clock time while the unit
is turned off, press DISP (display).
The power turns on, the clock time is shown for
5 seconds, then the power turns off.
EN29-33KW-XC939[EE]f.pm6 6/23/03, 3:49 PM 30