JVC CA-UXGN7V - Manual (Page 25)

Bas
ic
o
p
era
tions
of disc
/f
ile
pla
y
ba
ck
22
■When a disc/file is played back
Press 7.
When playback is stopped in the middle, playback
can be started from the stopped position.
■When a disc/file is played back
Press 7 once.
• Playback stops, the “RESUME” indicator lights
up in the display window, and the position where
playback has been stopped is stored.
• If 7 is pressed twice, the stopped position is
cleared.
■When a disc/file is stopped in the middle
Press [DVD/CD 6] or [USB 6].
NOTE
• You can deactivate the resume playback func-
tion. (Refer to “RESUME” on page 35.)
■When a disc/file is played back
Press or [DVD/CD 6] or [USB 6].
• To return to normal playback, press [DVD/CD
6 ] or [USB 6] again.
■When a disc/file is played back
Press 1 or ¡.
• Each time you press 1 or ¡, the speed
increases.
• To restore the normal speed, press [DVD/CD
6 ] or [USB 6].
NOTE
• For some discs/files, sound is intermittent or no
sound is produced during fast reverse/fast for-
ward search.
• The selectable speeds and displays vary by the
disc/file type.
Stopping playback
Resuming playback
Temporarily stopping playback
Starting playback from the stored
position
Pausing playback
Fast reverse/fast forward
search
For the locations of the remote
control buttons, refer to page 18.
UX-GN7V[US]EN.book Page 22 Monday, January 19, 2009 11:51 AM