JVC RC-EX30B - Manual (Page 25)

20
English
Synchronized recording with CD playback
You can make the CD player to start playback when the tape deck enters the recording mode.
PUSH
PLA Y/P AUSE
ST OP
PROGRAM/ CLOCK SET
HBS/ PRESET EQ
DISPLAY
TA PE
CD
BAND
RANDOM
TUN ER
GR OUP
REMOTE SENSOR
PRESET UP
PRES ET DOWN
TAPE
FM MODE /BEAT CUT
PROGRAM/
CLOCK SET UP
DOWN
INTRO
HBS/ PRESET EQ
REPEAT
STANDBY/ON
DISPLAY
MUTING PRESET
VOLUME
RM-SRCEX30J REMOTE CONTROL
1 2 3
4 5 6
7 8 9
0 OVER
CD/ RANDOM TUNER/ BAND
GROUP
+
–
2 4 1 3 4 3 5 4
1 Load a cassette.
Use only a type-I normal tape.
2 Load a CD.
3 Press CD/RANDOM to enter CD mode.
You can press CD/RANDOM on the remote control
unit to enter CD mode.
4 To start recording from the desired track, select
the track by pressing
4 or ¢ in stop mode.
You can use the number buttons on the remote control
unit to select the track.
5 Press REC ¶.
PLAY
2 is also depressed, and synchronized
recording starts.
• The CD SYNC indicator appears in the display
window during synchronized recording.
When the tape reaches the end first, the CD player enters
the pause mode. Press PLAY/PAUSE
3/8 (or 3/8 on
the remote control unit) to continue playback, or press
STOP
7 (or 7 on the remote control unit) to stop
playback.
When the CD player stops first, the tape continues
running. In this case, press STOP/EJECT
§ to stop
the tape.
Erasing
When recording on a pre-recorded tape, the previous
recording is erased and only the new recording is heard
next time the tape is played back. To erase a tape without making a new
recording
1 Press TAPE on the unit to enter the tape mode.
2 Press REC ¶.
02_01-23_RC-EX30B_E_En.p65 04.8.17, 1:43 PM 20