Operation, Sub145 – JBL SCS145.5 User Manual
Page 9
9
OPERATION
MIN MAX
Subwoofer
Level
MIN MAX
Subwoofer
Level
Move the Master Power
switch (marked “Power” ¡)
to the “
•
” (On) position to use
the subwoofer. The SUB145
subwoofer will automatically
turn on or go into standby
(sleep) mode when left in the
auto mode (“Auto/On” switch
™ in the “Auto” position).
When your receiver or ampli-
fier is off, or is not sending
program material to the sub-
woofer, the subwoofer will be
in standby mode (LED will be
red). When the subwoofer
senses an audio signal, it will
automatically turn on (LED will
be green). If the subwoofer
does not sense a signal after
approximately twenty minutes,
it will automatically go back
into standby mode.
When the “Auto/On” switch
™ is switched to the “On”
position, the subwoofer will
remain on, whether or not
program material is playing.
If you will be away from home
for an extended period of time,
or if the subwoofer will not
be used, switch the Master
Power switch ¡ to the Off
position.
VOLUME
POWER
SPEAKER LEVEL
+ – – +
SUBWOOFER
LEVEL
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
OUT
IN
L R
LINE LEVEL IN
LFE
L
R
AUTO ON
MIN MAX
SUB145
£
¡
™
IMPORTANT: CONNECT STRIPED WIRE TO RED ( ) SPEAKER TERMINAL.
GREEN: ON
RED: STANDBY
+
Volume may be adjusted
using the Subwoofer Level
control
£
as shown.
SCS145.5 OM 7/21/04 12:44 PM Page 9