JBL SCS145.5 - Manual (Page 8)

8
DOLBY PRO LOGIC (NON-DIGITAL) – SPEAKER LEVEL
Use this installation method
for Dolby Pro Logic applica-
tions (not Dolby Digital, DTS
®
or other digital processing),
where the receiver/processor
does not have a subwoofer
output, or a volume-controlled
preamp (line-) level output:
Connect your receiver or
amplifier’s front left and right
speaker terminals to the left
and right terminals on the
subwoofer that are marked
“Speaker Level In.” Connect
the left and right terminals on
the subwoofer that are
marked “Speaker Level Out”
to the corresponding termi-
nals on the back of your front
left and right speakers.
Connect your receiver or
amplifier’s center and
surround speaker terminals
to the corresponding termi-
nals on the back of your cen-
ter and surround speakers.
Right Front
Right Surround
Left Front
Left Surround
Center
+ – + –
+ –
+ – + –
+ –
+ –
Left Front Center
+ –
Left Surround
Right Front
+ –
Right Surround
+ –
Subwoofer
Receiver
SPEAKER LEVEL
+ – – + L R
OUT
IN
SCS145.5 OM 7/21/04 12:44 PM Page 8