JBL ON Stage Micro II - Manual (Page 4)

4
jbl on stage micro II easy setup guide
Carefully unpack your speaker
system and identify all its
components. JBL On Stage
Micro II, power supply, remote
and adapter. Step 2. Move the battery door to
the unlocked position to open
the battery compartment.
or
Step 3. Place 4 AAA batteries
in the battery compartment.
Step 5. Place the appropriate iPhone/iPod adapter onto JBL On Stage
Micro II. Place your iPhone/iPod on the docking connector or connect
a 3.5mm (1/8") stereo audio cable to the rear of the JBL On Stage
Micro II. Connect the audio cable to the audio source.
Step 4. Connect the power adapter
into the jack labeled “6V DC In” on
the rear of the JBL On Stage Micro
II and plug the power adapter into
a wall outlet or power strip.
Step 6. Press the Power button
on the back of the JBL On Stage
Micro II. A green LED will light
when the JBL On Stage Micro II
system is on. Step 7. Adjust the volume using
(+) to increase and (–) to decrease.
Press both to mute the JBL On
Stage Micro II. Press either button
to unmute.
Syncing and transfering files with your computer
Make sure your iPhone/iPod is securely docked into the JBL On Stage Micro II. Connect a USB cable (not included) into the USB jack on the back of the unit, connect other end of the USB cable directly
to your computer’s USB port. Make sure your iPhone/iPod and iTunes are updated to the latest software version.
* Auxilary audio
cables not included
- +