JVC DLA-HX2U - Manual (Page 40)

40
When video input is selected
“Input” Displays the image input [VIDEO], [Y/C],
[PC2]) when projecting.
“Switcher” Displays the selected switcher matching
the specification of this projector.
“0”
: not being used.
“1-10” : switcher number.
For details, please check with your au-
thorized dealer.
“Source” Displays the type of video signal of the
image projected.
“Lamp time” Displays the number of accumulated used
hours of the light-source lamp.
When PC input is selected
“Input” Displays the computer input ([PC1],
[PC2], [PC3]) when projecting.
“Switcher” Displays the selected switcher number
matching the specification of this projec-
tor.
“0”
: not being used.
“1-10” : switcher number.
For details, please check with your au-
thorized dealer.
“Resolution” Displays the resolution of the inputted sig-
nal. (Horizontal x vertical)
•
Some inputted signals cannot be dis-
played correctly.
“Frequency H” Displays the horizontal frequency of the
inputted signal.
“Frequency V” Displays the vertical frequency of the in-
putted signal.
“Lamp time” Displays the number of accumulated used
hours of the current light-source lamp.
When no image signal is inputted
“Input” Displays the current selected image in-
put ([VIDEO], [Y/C], [PC1], [PC2], [PC3])
when projecting.
“Switcher” Displays the selected switcher number
matching the specification of this projec-
tor.
“0”
: not being used
“1-10” : switcher number.
For details, please check with your au-
thorized dealer.
“Lamp time” Displays the number of accumulated used
hours of the light-source lamp.
Adjustments and Settings Using Menus
t
“Information” menu
Displays the information such as image input currently selected, other
information and lamp usage time.