JVC Rear Projection Television HD-52Z575 - Manual (Page 26)

1-26 (No.YA092B)
4.6 INITIAL SETTING VALUE OF SERVICE MENU
(1) Adjustment of the SERVICE MENU is made on the basis of the initial setting values; however, the new setting values which set
the screen in its optimum condition may differ from the initial setting.
(2) Do not change the initial setting values of the setting items NOT LISTED IN ADJUSTMENT.
CAUTION:
Never change the initial setting value any adjustments except for those that are designated in the adjustment procedures.
In case where you have made undesignated adjustments by mistake, never press the [MUTING] key on the remote control unit.
Whenever you had not pressed the [MUTING] key, you would be able to recover the initial value by switching the [POWER] key.
4.6.1 [1.ADJUST]
VIDEO SYSTEM
Item No. Item name Variable range Setting value
S001 PREPARE 0~31 0
S002 NTSC BL 0~15 1
S003 NTSC CNT 0~255 44
S004 NT CR OF 0~15 4
S005 NT CB OF 0~15 4
S006 525i BL 0~15 1
S007 525i CNT 0~255 44
S008 5i CB OF 0~15 0
S009 5i CR OF 0~15 0
S010 5i CR GN 0~15 4
S011 5i CB GN 0~15 4
S012 HD BL 0~63 0
S013 HD CB OF 0~63 0
S014 HD CR OF 0~63 0
S015 RT CONT 0~15 7
S016 RT CB OF 0~15 2
S017 RT CR OF 0~15 5
S018 RT CL GA 0~15 4
S019 PC CL MB 0~7 0
S020 PC CL LB 0~255 0
S021 PC CL MR 0~3 0
S022 PC CL LR 0~255 0
S023 (NO DISPLAY) 0~255 0
S024 (NO DISPLAY) 0~255 0
S025 (NO DISPLAY) 0~255 0
S026 (NO DISPLAY) 0~255 0
S027 (NO DISPLAY) 0~255 0
S028 (NO DISPLAY) 0~255 0
S029 (NO DISPLAY) 0~255 0
S030 R DRIVE 0~255 0
S031 G DRIVE 0~255 0
S032 B DRIVE 0~255 0
S033 (NO DISPLAY) 0~255 0
S034 (NO DISPLAY) 0~255 0
S035 (NO DISPLAY) 0~255 0
S036 (NO DISPLAY) 0~255 0
S037 (NO DISPLAY) 0~255 0
S038 (NO DISPLAY) 0~255 0
S039 ILA COM 0~255 0
AUDIO SYSTEM
Item No. Item name Variable range Setting value
T001 IN LEVEL 0~255 007
T002 LOW SEP 0~255 037
T003 HIGH SEP 0~255 033
T004 AFC 0~255 0 (Fixed)
T005 (NO DISPLAY) 0~255 0 (Fixed)
T006 ATT V ON 0~1 0 (Fixed)
T007 ATT U ON 0~1 0 (Fixed)
T008 ATT C ON 0~1 0 (Fixed)
T009 (NO DISPLAY) 0~255 0 (Fixed)
T010 (NO DISPLAY) 0~255 0 (Fixed)
PANEL CONTROL SYSTEM [Do not adjust : All fixed]
Item No. Item name Variable range Setting value
P001 TM HOR H 0~255 0
P002 TM HOR L 0~255 0
P003 TM MIN 0~255 0
P004 TEMP 0~255 0
P005 (NO DISPLAY) 0~255 0
P006 (NO DISPLAY) 0~255 0
P007 (NO DISPLAY) 0~255 0
P008 (NO DISPLAY) 0~255 0
P009 (NO DISPLAY) 0~255 0
P010 (NO DISPLAY) 0~255 0
DRIVE SYSTEM [Do not adjust : All fixed]
Item No. Item name Variable range Setting value
D001 SLV GN 0~3F 00
D002 SLVH GN 0~3F 00
D003 SLH GN 0~3F 00
D004 SLV Pf 0~03 00
D005 SLH Pf H 0~01 00
D006 SLH Pf L 0~03 00
D007 SL EGCON 0~3F 00
D008 SL EGONF 0~01 00
D009 SL CRGON 0~3F 00
D010 SL CRGON 0~01 00
D011 SL ON OF 0~01 00