JVC GET0087-001A - Manual (Page 7)

7
ENGLISH
BASIC OPERATIONS
3
Adjust the volume.
4
Adjust the sound as you want.
(See pages 22 – 24.)
To drop the volume in a moment
Press briefly while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To turn off the power
Press for more than one second.
“SEE YOU” appears, then the unit turns off.
• If you turn off the power while listening to a
disc, CD play will start from where playback
has been stopped previously next time you turn
on the power.
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 25.
To increase the volume.
1 2 3
KD-SX927R
To decrease the volume.
Volume or audio level
indicator (see page 27)
Turning on the power
1
Turn on the power.
“HELLO” appears on the display.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To select the tuner, press FM AM DAB
repeatedly.
To select CD, CD changer (or “LINE IN”*),
press CD CD-CH (AUX) repeatedly.
* If “LINE IN” does not appear on the display
(see page 28), set the “EXT IN” setting to
“LINE IN.”
To select “AUX IN” (component connected
to the AUX IN jack on the control panel),
press and hold CD CD-CH (AUX).
Volume level appears
CD
CD-CH
(CD changer)
(or LINE IN)*
FM1 FM2
FM3 AM
EN07-07KD-SX927R[EE]f.pm5 14/02/2002, 10:15 AM 7