JVC UX-Z7MDR - Manual (Page 63)

– 58 –
6
Repeat steps 4 and 5 to select all the tracks you want
to erase.
• You can select up to 15 tracks. If you select a 16th
track to erase, “MEMORY FULL” will appear in the
main display.
7
Press ENTER.
8
Press ENTER.
“EDITING” appears in the main display for a while,
then “WRITING” and the MD REC indicator flash
while the editing you have made is being recorded on
the MD.
Erasing All Tracks—ALL ERASE
This function allows you to erase all the tracks on an MD.
You cannot resume the erased tracks.
On the remote control ONLY:
In the following example, the process is explained from the
very first—that is, inserting a disc. You can also edit an MD
during playback (in Normal play mode).
1
Insert an MD you want to edit into the MD loading
slot.
2
Press TITLE/EDIT repeatedly until “ALL
ERASE?” appears in the main display.
• If you want to stop this editing process, press
CANCEL.
3
Press SET.
• To cancel the setting, press CANCEL.
4
Press ENTER.
“EDITING” appears in the main display for a while,
then “WRITING” and the MD REC indicator flash
while the editing you have made is being recorded on
the MD.
“BLANK DISC” appears in the main display.
Erasing Tracks—ERASE
This function allows you to erase unwanted tracks.
You cannot resume the erased tracks.
Once tracks are erased, the other tracks and/or groups are
renumbered.
You can erase up to 15 tracks at a time.
• To stop any time during the editing process before step 8,
press TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very first—that is, inserting a disc. You can also edit an MD
during playback (in Normal play mode).
1
Insert an MD you want to edit into the MD loading
slot.
2
Press TITLE/EDIT repeatedly until “ERASE?”
appears in the main display.
• If the loaded MD has no track, “ERASE?” will not
appear.
• If you want to stop this editing process, press
CANCEL.
3
Press SET.
4
Press ¢ or 4 to select the track you want to
erase.
• You can select the track using the number buttons. In
this case, the selected track starts playing repeatedly.
5
Press SET.
“
” appears in the main display.
The track marked with “ ” will be erased.
• When you do not want to erase the track, press
CANCEL to remove “ .”
Ex.: When track 5 is selected.
EN54-58UX-Z7MDR[B]f 02.6.28, 13:51 58