JVC UX-Z7MDR - Manual (Page 61)

– 56 –
5
Press SET.
• To cancel the setting, press CANCEL, then repeat
from step 4.
6
Press ENTER.
“EDITING” appears in the main display for a while,
then “WRITING” and the MD REC indicator flash
while the editing you have made is being recorded on
the MD.
To divide the joined tracks, see the DIVIDE function on
page 55.
If “CANNOT JOIN” appears in step 5
You cannot join the following tracks.
• Tracks recorded using different recording length modes (SP,
LP2, LP4). (See page 38.)
• Digital-recording tracks and analog-recording tracks.
• Tracks recorded using monaural long recording method (not
possible on this unit) and stereo-recording tracks.
When the track belongs to a group
If the preceding track of two tracks you want to join belongs to a
group, the newly joined track will belong to that group. On the
other hand, if the preceding track does not belong to any group, the
newly joined track will not belong to any group even if the
succeeding track belongs to a group.
Joining Two Tracks—JOIN
This function allows you to join two adjacent tracks into
one track.
When the tracks have their own titles, the title of the
preceding track is reassigned to the joined track.
Once two tracks are joined, the other tracks and/or the
groups are renumbered.
• To stop any time during the editing process before step 6,
press TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very first—that is, inserting a disc. You can also edit an MD
during playback (in Normal play mode).
1
Insert an MD you want to edit into the MD loading
slot.
2
Press TITLE/EDIT repeatedly until “JOIN ?”
appears in the main display.
• If the loaded MD has no track, “JOIN ?” will not
appear.
• If you want to stop this editing process, press
CANCEL.
3
Press SET.
• If the loaded MD has only one track, you cannot go
to the following steps.
4
Press ¢ or 4 to select the two adjacent tracks
you want to join.
• You can select the tracks using the number buttons*.
In this case, the selected track starts playing
repeatedly.
* Select the succeeding track of two tracks when you use the
number buttons.
Ex.: When tracks 2 and 3 are selected.
EN54-58UX-Z7MDR[B]f 02.6.28, 13:51 56