JVC DX-T55 - Manual (Page 18)

14
English
Creating 3-dimensional Sound
Field—3D Phonic
While playing a disc...
Presetting Automatic DVD Video Sound
Increase Level
The DVD Video sound is sometimes recorded at a lower
level than other discs and sources. You can set the increase
level for the currently loaded DVD Video, so you do not
have to adjust the volume when you change the source.
As the number increases, sound level also increases.
• The initial setting is “DVD LEVEL3.”
Changing the Color System and
Scanning Mode
You can select the video output to match it to the color
system of your TV (NTSC or PAL).
• If you connect a progressive TV through the
COMPONENT jacks, you can enjoy a high quality picture
from the built-in DVD player by selecting progressive
scanning mode.
• You can change the setting only while the disc playback is
stopped.
1
Enter the color system setting mode.
2 Select the color system and scanning mode.
3 Store the setting.
Changing the Picture Tone
While viewing a playback picture on the TV, you can select
the preset picture tone, or adjust it and store your own
preference.
To select a preset picture tone
1 While playing, display VFP setting screen.
3D ACTION Suitable for action movies and sports
programs.
3D DRAMA Creates natural and warm sound. Enjoy
movies in a relaxed mood.
3D THEATER Enjoy sound effects like in a major
theater.
Remote
ONLY
INFO
3D PHONIC
3D PHONIC ACTION 3D PHONIC DRAMA
3D PHONIC THEATER 3D PHONIC OFF
On the TV screen
DVD LEVEL DVD LEVEL1 DVD LEVEL2
DVD LEVEL3
NTSC / PAL NTSC or PAL Interlaced scanning. For
a conventional NTSC or PAL TV.
NTSC / PAL
PROG NTSC or PAL Progressive scanning.
For a progressive NTSC or PAL TV.
Remote
ONLY
INFO
SCAN MODE
VFP
4 sec.
L R BALANCE
PAL
PAL PROG NTSC PROG
NTSC
SET
Remote
ONLY
SCAN MODE
VFP
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
0
0
On the TV screen
DXT55_UW.book Page 14 Tuesday, May 9, 2006 1:08 PM