JVC AV-27D203 - Manual (Page 51)

51
Search Codes
Cable/Satellite Search Codes Function:
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press the TV P
OWER and R ETURN + buttons. Hold for at least three seconds and release.
3) Press TV P OWER , see if the CATV or Satellite box responds.
4) If there was a response, press R ETURN +. The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 52 times without a response, use
the remote control which came with the equipment.
5) Press R ETURN + to exit.
VCR Search Codes Function:
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
2) Press the VCR P
OWER and R ETURN + buttons. Hold for at least three seconds and release.
3) Press VCR P OWER , see if the VCR responds.
4) If there was a response, press R ETURN +. The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use
the manufacturers remote control which came with the VCR.
5) Press R ETURN + to exit.
DVD Player Search Codes Function:
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
2) Press the DVD P
OWER and R ETURN + buttons. Hold for at least three seconds and release.
3) Press DVD P OWER , see if the DVD player responds.
4) If there was a response, press R ETURN +. The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 30 times without a response, use
the manufacturers remote control which came with the DVD player.
5) Press R ETURN + to exit.
NOTE: Except for AV-27320.