How to use the audio extension cable, How to attach the core filter, Pg. 11 f – JVC GR-DF420 User Manual
Page 11
EN
11
GETTING STARTED
MasterPage: Start_Right
How To Use The Audio Extension Cable
When using an optional external microphone,
connect to the provided Audio extension cable
(with a core filter attached), then connect the
Audio extension cable to the camcorder. The
core filter reduces interference. (See the right
column.)
How To Attach The Core Filter
Attach the core filters to the cables. The core
filter reduces interference.
1
Release the stoppers on both ends of the
core filter.
2
Run the cable through the core filter, leaving
approx. 3 cm of cable between the cable plug
and the core filter.
Wind the cable once around the outside of the
core filter as shown in the illustration.
3
Close the core filter until it clicks shut.
NOTES:
● Take care not to damage the cable.
● When connecting a cable, attach the end with the
core filter to the camcorder.
Audio extension
cable (provided)
Core filter
Open the
cover.
Stereo
microphone
To MIC
Stopper
3 cm
Wind once.
Core filter
GR-DF420PAL.book Page 11 Tuesday, January 18, 2005 8:52 PM