JVC MX-KB1 MX-KB2 - Manual (Page 18)

15
Using the CD Player
Eng
lish
Random Play
The tracks of the selected CD will play in no special order when
you use this mode.
1 In Stop mode, set the CD Player in Random
Play mode.
On the Unit
Press the RANDOM button to light the “RANDOM”, “REPAET”
and “1 CD” indicator.
On the Remote Control
Press the PROGRAM/RANDOM button until the “RANDOM”
indicator lights up.
The “REPEAT” and “1 CD” indicator also light up on the display.
Each time you press the button, the display changes as follows:
PROGRAM
= RANDOM REPEAT = Normal display (Normal
Play) = (back to the beginning)
2 Press the CD
6
button.
The tracks on all the CDs are played in random order.
To stop playing, press the 7 button.
To skip a track during playback, press the ¢ button to
jump to the next track in the random sequence.
To exit Random Play mode, while the CD Player is stopped,
press the RANDOM button on the Unit or the PROGRAM/RAN-
DOM button on the Remote Control again to light off the “RAN-
DOM” indicator.
Repeating Tracks
You can repeat all tracks or individual track, as many times as you
like.
Press the REPEAT button.
The Repeat indicator changes with each press of the button, as fol-
lows:
ALL CD
= 1CD = 1 = Blank display = (back to the beginning)
To stop playing, press the 7 button. Changing the source to the
other (e.g. Tuner) will also stop playing.
To exit Repeat mode, press the REPEAT button until the “RE-
PEAT” indicator on the display goes out.
Tray Lock Function
In order to safely keep the CD in the CD Player, the tray can be
electronically locked.
Locking the Tray
1 Turn on the System and enter CD mode.
2 While pressing down the
7
button, press the
CD Open/Close
0
button on the Unit.
“LOCKED” appears on the display.
• If you try to open the tray by pressing the 0 button,
“LOCKED” appears on the display to let you know that the tray
has been locked.
Unlocking the Tray
Repeat above steps 1 and 2.
“UNLOCKED” appears on the display.
• Even after the System is unplugged, the tray lock condi-
tion will be retained for a few days.
Changing the Display for CD
Each time you press the DISPLAY button, the display changes as
follows:
Track number, elasped playing time of the track
≠
Track number, remaining time of the track
≠
Track number, remaining time of the disc
≠
Track number, elasped playing time of the disc
≠
Clock
≠
(back to the beginning)
For MP3 discs (For MX-KB2 only)
Track number, elasped playing time of the track
≠
ID3 tag
The display scrolls in order of title, artist and album
≠
Album\file name (maximum 16 characters)
The display scrolls in order of album and file name
≠
Group number, track number
≠
Clock
≠
(back to the beginning)
REPEAT ALL: In Normal Play mode, repeats all the tracks on
all the CDs.
In Program Play mode, repeats all the tracks in
the program.
REPEAT 1CD: Repeats all tracks on one CD. (Selectable in
Normal Play only)
REPEAT 1: Repeats one track.
MX-KB2[UW].book Page 15 Friday, May 14, 2004 5:46 PM