Ext setting – JVC AV-32T77SK User Manual

Page 31

SET UP menu

AV-32/28T77SK / LCT1570-001A-U / ENGLISH

EXT SETTING

1 Choose EXT SETTING, then press

the a

a or 3

button

The EXT SETTING menu appears.

2 Follow the instructions for the

function you want to use and

operate the function
y

You can enjoy the high-quality picture of

the 2 S-VIDEO signal (Y/C signal).
ID LIST:
You can have a name for each of the
devices connected for each EXT terminal.
DUBBING:
You can choose a signal source to be

output from an EXT-2 terminal.

(S-VIDEO input)

You can connect a device (such as an S-VHS
VCR) to enjoy the high-quality picture of the

S-VIDEO signal (Y/C signal).
Preparation:

• First read the device’s instruction manual

and “Additional preparation” on page 34

to connect the device to the TV properly.

Second, follow the device’s instruction
manual to set the device so that it sends an

S-VIDEO signal (Y/C signal) to the TV.

• Do not set y (S-VIDEO input) to an

EXT terminal connected to a device

which cannot output an S-VIDEO (Y/C
signal). If it is set wrongly, a picture

cannot appear.

1 Press the 5

or 6

buttons to

choose an EXT terminal

2 Press the yellow button and set the

(S-VIDEO input). Then press

the a

a button

An y (S-VIDEO input) mark is

displayed. You can view an S-VIDEO
signal (Y/C signal) instead of the regular

video signal (composite signal).

To cancel the y

(S-VIDEO input)

setting:
Press the yellow button and turn off y (S-
VIDEO input) mark. The regular video

signal (composite signal) pictures are

resumed.

• The EXT-1 terminal does not support S-

VIDEO signal (Y/C signal) and you

cannot set y (S-VIDEO input) in the
EXT-1 terminal.

• Setting y (S-VIDEO input) changes

the head character from “E” to “S”. When

an EXT terminal receives a normal video

signal, “E1”, “E2”, “E3” or “E4” appears
on the display. This changes to “S2” or

“S3” when it receives an S-VIDEO

signal.

• Even a device which can output an

S-VIDEO signal (Y/C signal) may output
a regular video signal (composite signal)

depending on the device setting. If a

picture cannot appear because the y
(S-VIDEO input) setting has been made,

read the device instruction manual

carefully again to check for the device
settings.

D0020-EN

EXT-1

DUBBING

EXT-2

EXT-4

EXT SETTING

ID LIST

EXT-3