Jensen JCR-263 - Manual (Page 6)

5
II. This receiver has a built-in bar antenna. If the AM reception is week, slightly rotate or re-positioning
the unit will usually improve the reception.
AUX OPERATION
THIS UNIT FEATURES AN AUX LINE-IN JACK FOR CONNECTING YOUR iPod, MP3 PLAYER OR OTHER
DIGITAL MUSIC PLAYER.
1. Connect the headphone jack of your external device to the AUX IN Jack (# 8) located on the back of the
J
ＣＲ－２６３ (cable not included).
2. Turn on the J
ＣＲ－２６３
and set the FUNCTION Selector (# 9) to the “AUX” position.
3. Start playing your iPod, MP3 player or other external audio device.
4. Slowly adjust both volume controls on the
J
ＣＲ－２６３ and the external device.
5. Turn off your iPod, MP3 player etc. when finish listening.
6. Turn
the ＪＣＲ－２６３ off and unplug the AUX Line-IN jack.
ＳＥＴＴＩＮＧ
ALARM
ＴＩＭＥ
AND WAKE UP MODE
The
J
ＣＲ
-
２６３ allows you to set two different wake up times that you can choose to use independently, as ALARM
1, ALARM 2 or simultaneously together.
The J
ＣＲ
-
２６３ provides wake to RADIO or ALARM BUZZER
ｏｐｔｉｏｎｓ ．
Setting ALARM Time
（ｓ）Ａｎｄ
Wake Up Mode
Note:
Ｔｈｅ
Alarm time
（ｓ）
can be set
ｅｉｔｈｅｒ
in
ＰＯＷＥＲ ＯＮ ｏｒ ＯＦＦ
mode.
1. Set the Clock Set Selector (# 18) to AL1
ｏｒ ＡＬ２
.
Ｔｈｅ
respective ALARM 1 (AL1)
ｏｒ
ＡＬＡＲＭ
2 (AL2) Indicator will appear with ‘AM 12:00’ blinking in the Display.
2. While the ‘AM 12:00’ is blinking
, press and hold the TIME SET
!
or
"
Buttons. The Digits will skip forward or
backward rapidly.
3. Keep pressing and release the TIME SET ! or " Buttons (# 15 or # 16) to adjust the time. The Hour and
Minute digits will advance forward or backward rapidly.
4. Keep pressing and release the Buttons when the displayed clock time is close to the desired alarm
time. Repeatedly press the
! or " Buttons to adjust the alarm time precisely.
Note: Make sure the hour is set so that AM or PM is correctly displayed.
5. Set the Clock Set Selector (# 18) to the “LOCK” position to complete the setting.
or
Ｉｎｄｉｃａｔｏｒ ｄｉｓａｐｐｅａｒ
s
ｉｎ ｔｈｅ ＬＣＤ Ｄｉｓｐｌａｙ．
6. If you want to be woke up by ALARM 1
ｏｒ ＡＬＡＲＭ２
, press ALARM1 (# 1)
ｏｒ ＡＬＡＲＭ２
Button (# 17) once
．Ｔｈｅ
respective
ＡＬＡＲＭ Ｉｎｄｉｃａｔｏｒ
,
Ａｌａｒｍ ｔｉｍｅ ａｎｄ
the
‘
W
ａｋｅ ｔｏ
B
ｕｚｚｅｒ’ｉｃｏｎ ｗｉｌｌ ａｐｐｅａｒ ｉｎ ｔｈｅ Ｄｉｓｐｌａｙ．
Ｐｒｅｓｓ ｔｈｅ
respective
Ａ
larm
Ｂｕｕｔｏ
n
ａｇａｉｎ ｗｉｌｌ ｓｗｉｔｃｈ ｔｈｅ
Ｗａｋｅｕｐ ｍｏｄｅ ｆｒｏｍ ｂｕｚｚｅｒ（ ）ｔｏ ｒａｄｉｏ（ ）．