JVC Model KD-S10J - Manual (Page 19)

19
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms Causes Remedies
• Sound cannot be heard The volume level is set to the Adjust it to the optimum level.
from the speakers. minimum level.
Connections are incorrect. Check the cords and
connections.
• This unit does not work at The built-in microcomputer While holding SEL (Select),
all. may have functioned press (Standby/
incorrectly due to noise, etc. On Attenuator) for more
than 2 seconds to reset the unit.
(The clock setting and preset
stations stored in memory are
erased) (See page 2)
• SSM (Strong-station Signals are too weak. Store stations manually.
Sequential Memory)
automatic preset does not
work.
• Static noise while listening The antenna is not connected Connect the antenna firmly.
to the radio. firmly.
• CD automatically ejects. CD is inserted upside down. Insert the CD correctly.
• CD-R cannot be played CD-R is not finalized. • Insert a finalized CD-R.
back.
• Tracks on the CD-R cannot • Finalize the CD-R with the
be skipped. component which you used
for recording.
• CD can be neither played CD is locked. Unlocked the CD. (See page 11)
back nor ejected.
The CD player may have While holding
functioned incorrectly. (Standby/On Attenuator), press
/ (Eject) for more than 2 seconds.
Be careful not to drop the CD
when it is ejected.
• CD sound is sometimes You are driving on rough Stop playback while driving on
interrupted. roads. rough roads.
CD is scratched. Change the CD.
Connections are incorrect. Check the cords and
connections.
• “NO DISC” appears on the No CD in the loading slot. Insert a CD into the loading slot.
display.
CD is inserted incorrectly. Insert the CD correctly.
General
FM/AM
CD Playback
EN18-20-KD-S5050[J] f 7/29/03, 10:33 AM 19