JVC SR-VS30U - Manual (Page 13)

Masterpage:Right-NoTitle0
EN
13
Filename [VS30U_1-EN.fm]
Page 13 January 31, 2002 3:21 pm
S-VIDEO Connection
8
To connect to a TV with S-VIDEO/AUDIO input
connectors . . .
A
Connect the VCR to TV.
A Connect the antenna, VCR and TV as per “Basic
Connections” (
੬
pg. 12).
B Connect the VCR’s S VIDEO OUT connector to the
TV’s S-VIDEO input connector.
C Connect the VCR’s AUDIO OUT connectors to the
TV’s AUDIO input connectors.
B
Connect the VCR to power source.
Plug the end of the AC power cord into an AC outlet.
● The clock and tuner channels will automatically be set when
the antenna is connected and when the AC power cord is first
connected to an AC outlet (
੬
pg. 14). (If “Auto” or “CH” is
displayed on the front display panel before the VCR is
powered on, the clock and tuner channels are being set
automatically. Wait for the time to be displayed on the front
display panel before powering on the VCR.)
NOTES:
● You can obtain high-quality S-VHS pictures.
● To operate the VCR with your TV using the S-VIDEO
connection, set your TV to its AV mode. You can also use the
TV/VCR button on the VCR's Remote to set your TV to the AV
mode. (
੬
pg. 67)
● For switching the TV’s mode, refer to the instruction manual of
your television.
Antenna or Cable
S VIDEO
OUT
Matching Transformer
(not supplied)
Coaxial Cable
ANTENNA IN
AC Outlet
RF Cable
(supplied)
Back of VCR
ANTENNA OUT
AUDIO
OUT
Audio/Video Cable
(supplied)
Flat Feeder
TV
S-Video
Cable
(supplied)
To S-VIDEO Input
Connector
Yellow:
Not connected
AC Power Cord
To 75 ohm Terminal
To Audio/Video
Input Connectors
VS30U_1-EN.fm Page 13 Thursday, January 31, 2002 3:33 PM