JVC SR-VS30U - Manual (Page 11)

Masterpage:Right-NoTitle0
EN
11
Filename [VS30U_1-EN.fm]
Page 11 January 31, 2002 3:21 pm
ON-SCREEN DISPLAY (for DV deck)
If you press DISPLAY/OSD on the Remote when “SUPERIMPOSE” is set to “ON” (
੬
pg. 71), various operational
indicators appear on the TV screen.
A Operation Mode Indicators
B Tape Speed SP/LP
C Sound Mode Display
੬ pg. 76
D Timer Warning Display
A warning appears on the TV screen to tell you that the timer-
recording is to start in 5 minutes if you’re not in the Timer
mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press CANCEL on the Remote.
ERROR Indicator*
* ERROR indicator appears when you start dubbing a tape with a
copy protection signals or when Audio Dubbing or Insert Editing is
not possible depending on the condition.
E Time Code Display ੬ pg. 41, 76
F Audio Mode Display ੬ pg. 40
G DV Indicator
H SAP Indicator
੬ pg. 41
I Stereo program Indicator ੬ pg. 41
J Day/Clock Display
K Channel Position Number/
Auxiliary Input Indicator (L-1 or F-1)
Dubbing Direction Indicators
(VHS
]
DV) ੬ pg. 53
L “Cassette Loaded” Mark
To recall an indication
A Press DISPLAY/OSD.
●All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, remain on the screen.
B Press DISPLAY/OSD again to clear the display.
●The RECORD/PAUSE indication remains on the screen.
VS30U_1-EN.fm Page 11 Thursday, January 31, 2002 3:33 PM