Jacuzzi Steam Enclosure - Manual (Page 7)

5
Step 9
Peel protective backing from the four adhesive
bumpers and stick to top and bottom of the panel recess
in the wall jambs. Lift the interior panel into position with
the rollers engaging the roller slot in the header and the
bottom fin inserted into the interior slot of the bath track.
Repeat for the exterior panel. The vertical vinyl wiper
blade of the interior panel should seal against the
exterior panel when both panels are in a closed position.
If the panels are not parallel to the wall jambs, remove
the doors and adjust the rollers up or down to compensate.
Step 11
Caulk the ends of the bath track and the interior
surface of the wall jambs
Step 12
Clean your Steam Enclosure with a soft cloth and
nonabrasive cleaner.
Step 10
Press the trim ring over the base of the four acrylic
towel bar brackets and press the brackets into the ends
of the towel bars. Attach the assembled towel bars to the
glass panels with four 10-24 x 7/8" truss head screws.
Q
N
O
P
O
N
Q