JVC 0705TNH-II-IM - Manual (Page 27)

27
Remote Programming
Cable/Satellite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press the P
OWER and R ETURN + buttons. Hold for at least three seconds and release.
3) Press the P OWER button on the remote, and see if the cable or satellite box responds.
4) If there was a response, press R ETURN +. The codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use
the remote control that came with your equipment.
5) Press R ETURN + to exit.
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or
“DVD”.
2) Press the VCR or DVD P OWER and R ETURN + buttons. Hold for at least three seconds and
release.
3) Press the VCR or DVD P OWER button, and see if the VCR or DVD responds.
4) If there was a response, press R ETURN +. The codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for
the DVD player), and there is no response, use the remote control that came with your
equipment.
5) Press R ETURN + to exit.
Search Codes
LCT1827-001B-A ENG 27 7/25/05, 9:13:22 AM