JVC KA-DV5000 - Manual (Page 11)

11
NETWORK SETUP menu screen
ⅷ indicates default factory setting.
Item
HOST NAME
DHCP
IP ADDRESS
SUBNET MASK
GATE WAY
PAGE BACK
Setting
ⅷOFF
ON
PORT SETUP menu screen
Item
HTTP for WEB
Browser
HTTP for
Media player
RTSP for
Streamproducer
RTSP for Quick
Time
PAGE BACK
Setting
1
:
ⅷ80
:
32767
1
:
ⅷ8080
:
32767
1
:
ⅷ8554
:
32767
1
:
ⅷ554
:
32767
Description
The screen for setting RTSP and HTTP port numbers appears.
HTTP for Web Browser can be set with the Web browser HTTP port number and HTTP for Media
Player can be set with the Media Player HTTP port number. RTSP for Streamproducer can be set
with the Streamproducer RTSP port number and RTSP for Quick Time can be set with the Quick
Time RTSP port number.
Normally, the unit can be used without changing the factory settings.
If there are port restrictions for the LAN environment of your PC, consult your network administrator.
* When changing a port number, refer to “5-1. Connecting with Camcorder” of the “Streamproducer”
User’s Guide of the network distribution software to change settings.
* Do not use the same port numbers for RTSP and HTTP.
* When a port number is changed, switch the power of the GY-DV5000 off once, and then switch it
on again.
Pressing the SHUTTER dial returns to the NETWORK SETUP menu screen.
Network settings
NETWORK MAIN SETUP menu screen items
Description
Displays the host name input setting screen. (4 ~ 64 alphanumerical characters)
[Factory setting: none]
Select whether DHCP server is used.
OFF: Use this setting when using LAN connection rather than DHCP.
When this setting is used, IP ADDRESS and SUBNET MASK, GATEWAY must also be set.
ON: Use this setting when using DHCP connection.
When using this setting, IP ADDRESS and SUBNET MASK, GATEWAY are automatically set.
* When DHCP is set to ON, WLAN ADHOC MODE cannot be set to AHDM or IBSS.
Displays the IP address setting screen.
When using LAN connection with DHCP set to OFF, this setting is required. Set a unique IP address.
IP ADDRESS setting is not available when DHCP is set to ON.
[Factory setting] 192.168.100.101]
Displays the subnet mask input screen.
This setting is required when using LAN connection with DHCP set to OFF.
SUBNET MASK setting is not available if DHCP is set to ON.
[Factory setting: 255.255.255.000]
Displays the gateway address input screen.
GATEWAY setting is not available when DHCP is set to ON.
[Factory setting: 192.168.100.254]
Pressing the SHUTTER dial returns to the NETWORK MAIN SETUP menu screen.
→ OVER