Jensen CD6112 - Manual (Page 9)

5
CD6112
FRONT PANEL RELEASE
The front panel release button (4) releases the mechanism that holds the
front panel to the chassis.
Detaching the Front Panel
To detach the front panel, first press the front panel release button to
release the left side of the panel. Next, grasp the released side and pull it off
the chassis. After removing the front panel, store it in the supplied carrying
case to protect it from dirt and damage.
Re-attaching the Front Panel
To re-attach the front panel, make sure the electrical terminals on the back
of the panel are free of dust and dirt, as debris could cause intermittent
operation or other malfunctions. Position the right side of the panel in place
so that it is correctly engaged, then lightly press the left side of the panel
until the mechanism locks it into place.