JVC GET0643-001A - Manual (Page 18)

ENGLISH
18
Listening to the satellite radio
Activate your SIRIUS subscription after
connection
1
2
SIRIUS Satellite radio starts updating all the SIRIUS
channels.
Once completed, SIRIUS Satellite radio tunes in to
the preset channel, CH184.
3 Check your SIRIUS ID, see page 27.
4 Contact SIRIUS on the internet at
to
activate your subscription, or you can call
SIRIUS toll-free at 1-888-539-SIRIUS (7474).
“SUB UPDT PRESS ANY KEY” scrolls on the display
once subscription has been completed.
Activate your XM subscription after
connection
• Only Channel 0, 1, and 247 are available before
activation.
1
2
XMDirect ™ Tuner Box or XMDirect2 Tuner System
starts updating all the XM channels. “Channel 1” is
tuned in automatically.
3 Check your XM Satellite radio ID labelled
on the casing of the XMDirect ™ Tuner Box
or XMDirect2 Tuner System, or tune in to
“Channel 0” (see page 19).
4 Contact XM Satellite radio on the internet
at to
activate your subscription, or you can call
1-800-XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).
Before operating, connect either one of the following (not supplied) to the CD changer jack on the rear of this unit.
• JVC SIRIUS satellite radio System, SC-C1 and KS-SRA100, PnP, SC-VDOC1 and KS-SRA100, for listening to the
SIRIUS Satellite radio.
• XM satellite radio System, JVC Smart Digital Adapter–XMDJVC100, CNP2000UC and CNPJVC1 for listening to
the XM Satellite radio.
GCI (Global Control Information) update
• If channels are updated after subscription, updating starts automatically. “UPDATING” flashes and no sound can
be heard.
• Update takes a few minutes to complete.
• During update, you cannot operate your satellite radio.
EN12-19_KD-S36[J]_1.indd 18 EN12-19_KD-S36[J]_1.indd 18 8/7/09 1:51:15 PM 8/7/09 1:51:15 PM