JVC 0205NYMCREBET - Manual (Page 67)

6
Getting Started
Connecting External Equipment
Connect a signal cord with stereo mini plugs (not supplied) between the System’s AUX jack on the front panel and the audio output jack
or output terminals of the external portable CD, MD player, STB, etc.
You can then listen to the external source through the System.
Connecting to the Wall Outlet
Plug the AC power cord into the wall outlet.
Now, your System is at your command!
DEMO Mode
When the System is connected to the wall outlet, a DEMO mode displaying some of the system’s features automatically starts.
To turn the DEMO display off, press any of the operation buttons. The DEMO display automatically stops.
To turn the DEMO display on, press the DEMO button on the Unit for more than 2 seconds.
• While the System is turned on, the DEMO display will automatically starts if no operation is made for 2 minutes. To cancel
this auto DEMO display function, press the CANCEL button on the Unit during DEMO display.
COMPU Play
JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment with a single press of the play
button for that function. One Touch Operation turns the power on for you, then starts the function you have specified. If the System is not
ready (no CD or tape in place), the System still powers on so you can insert a CD or tape.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
On the Unit
CD
6 button
FM/AM button
TAPE A
3, TAPE B 3 buttons
AUX button
CD1, CD2 and CD 3 buttons
CD Open/Close
0 button
On the Remote Control
CD
6 button
FM/AM button
TAPE A
3, TAPE B 3 buttons
AUX button
CD1, CD2 and CD 3 buttons
Signal cord (not supplied)
To audio output of
external equipment.
White
Red
Lch
Rch
CANCEL/DEMO
(For 2 seconds)
MX-KC4(UJ).book Page 6 Thursday, January 20, 2005 6:42 PM