JVC TK-C1480 - Manual (Page 20)

E-38
OTHERS
Installing the ferrite core
To retain electromagnetic compatibility, use the ferrite cores provided when connecting to the lens or
the power source.
VIDEO DC
IRIS
ALC
LEVEL
Av Pk
L H
Notes:
Install the ferrite cores within 50 mm of the camera-side connectors. (Fasten the ferrite
core with the wire clamp provided.)
For lens connection:
Pass the lens cable through the ferrite core twice and con-
nect it to the camera.
Wind twice
Ferrite core
Video-iris lens
(or galvanometnc-iris lens)
DIMENSIONS (Unit: mm)
SS412174H-002
TUV Rheinland Product Safety
..
geprufte Sicherheit ..
-NE PAS OUVRIR. RISQUE DE CHOC ELECTRIQUE
-DO NOT OPEN. SHOCK HAZARD
SC46171H-001
WARNING: AVIS:
1/4-20UNC
41
35
70
55
63
42
138
149
39
71
U1-32 5
4-R
Specifications
E-39
Image pickup device: TK-C1480U
1/3 type IT CCD, 768 (H) × 494 (V)
TK-C1480E and TK-C1481EG
1/2 type IT CCD, 752 (H) × 582 (V)
Synchronization method : Internal, Line lock, Full Genlock
Scanning frequency: TK-C1480U
(H) 15.734 kHz, (V) 59.94 Hz
TK-C1480E and TK-C1481EG
(H) 15.625 kHz, (V) 50 Hz
Resolution: 480 TV lines (H)
VIDEO OUT: Composite video signal 1 V (p-p), 75 Ω (BNC)
Y/C OUT: TK-C1480U (4-pin)
Y: 1V(p–p), 75 Ω
C: 0.286V(p–p), 75 Ω
TK-C1480E and TK-C1481EG (4-pin)
Y: 1V(p–p), 75 Ω
C: 0.3V(p–p), 75 Ω
Video S/N ratio: 50 dB (AGC OFF)
Minimum required illumination: 0.8 lx (50%, F1.2, AGC 20 dB)
0.4 lx (25%, F1.2, AGC 20 dB)
0.025 lx (50%, F1.2, AGC 20 dB, SENSE UP
× 32)
Communication: RS-422A or RS-485 (switchable)
9600 bit/s
Lens mount: C/CS mount
Power supply and power consumption:
TK-C1480U
AC24V `, 60 Hz, DC12V — --- 5.5W
TK-C1480E
AC 24 V ` 50 Hz/60 Hz, DC 12 V — --- 500 mA
TK-C1481EG
AC220V to AC240V `, 50 Hz/60 Hz, 75mA
Ambient temperature: –10°C to 50°C (operation)
0°C to 40°C (recommended)
Mass: TK-C1480U and TK-C1480E 600 ˝
TK-C1481EG 835 ˝
Accessory: TK-C1480U
Instructions ......................... 1 Ferrite core ................ 1
4P plug ............................... 1 Warranty card ............ 1
Service Information card ......... 1
TK-C1480E and TK-C1481EG
Instructions ......................... 2 Ferrite core ................ 1
4P plug ............................... 1
Design and specifications are subject to change without notice.