JVC CA-MXG51R - Manual (Page 20)

– 17 –
Playing Back Tapes
Playing Back a Tape
1
Press EJECT (
0) for the deck you want to
use.
2
Put a cassette in with the exposed part of the
tape down.
• You can play back only type I.
3
Close the cassette holder gently.
If you put cassettes in both decks A and B, the last deck
which you have put a cassette into is selected.
To operate the other deck, press TAPE A or TAPE B (or
TAPE A/B on the remote control).
4
Press TAPE
3 3 3 3 3 .
The tape play starts and the tape running
indicator (
3) starts flashing slowly.
When the tape plays to the end, the deck
automatically stops.
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.
To stop during play, press 7.
To operate the other deck, press TAPE A or TAPE B (or
TAPE A/B on the remote control), then TAPE
3.
To fast-forward the tape, press ¡ (or ¢ on the remote
control). The tape running indicator ( 3) starts flashing
quickly.
To rewind the tape, press
1 (or 4 on the remote
control). The tape running indicator (
2) starts flashing
quickly.
To remove the cassette, press
0 EJECT for deck A or
EJECT 0 for deck B.
EJECT
EJECT
For Deck A
For Deck B
EJECT
EJECT
TAPE
EN14-17.CA-MXG51R[B]_f 01.2.15, 8:52 PM 17