beautypg.com

Receiving fm stations with rds, Changing the rds information, Searching for programs by pty codes (pty search) – JVC CA-MXG51R User Manual

Page 15

background image

– 12 –

Receiving FM Stations with RDS

RDS allows FM stations to send an additional signal along
with their regular program signals. For example, the stations
send their station names, as well as information about what
type of program they broadcast, such as sports or music, etc.

When tuned to an FM station which provides the RDS
service, the RDS indicator lights up on the display.

With the unit, you can receive the following types of RDS
signals.

PS (Program Service):

Shows commonly known station names.

CT (Clock Time):

Shows clock time the station sends.

RT (Radio Text):

Shows text messages the station sends.

EON (Enhanced Other Networks):

Provides the information about the types of the
programs sent by other RDS stations.

More about RDS

• Some FM, MW, and LW stations do not provide RDS signals.
• RDS services vary among FM RDS stations. For details on RDS

services in your area, check with local radio stations.

• RDS may not work correctly if the received station is not

transmitting the signals properly or if the signal strength is weak.

Changing the RDS Information

You can see RDS information on the display while listening
to an FM station.

Press DISPLAY MODE.
• Each time you press the button, the display

changes to show the following information:

If no PS NAME, CT, or RT signals are sent by a station

“NO PS,” “NO CT” or “NO RT” appears in the main display.

Searching for Programs by PTY Codes (PTY
Search)

One of the advantages of RDS is that you can locate a
particular kind of program by specifying the PTY codes.
• For details on the PTY codes, see “Additional Information”

on page 25.

To search for a program using the PTY codes
REMEMBER you must preset FM RDS stations to use the
PTY codes. If not yet done, see page 11.
• There is a time limit in doing the following steps. If the

setting is canceled before you finish, start from step 1
again.

1

Press PTY/EON.

2

Press SELECT + or SELECT –
until the PTY code you want
appears on the display.

• Each time you press the button, the PTY codes change

as follows:

NEWS

“ AFFAIRS “ INFO “ SPORT “

EDUCATE

“ DRAMA “ CULTURE “

SCIENCE

“ VARIED “ POP M “ ROCK M “

M.O.R. M

“ LIGHT M “ CLASSICS “

OTHER M

“ WEATHER “ FINANCE “

CHILDREN

“ SOCIAL A “ RELIGION “

PHONE IN

“ TRAVEL “ LEISURE “ JAZZ “

COUNTRY

“ NATIONAL “ OLDIES “

FOLK M

“ DOCUMENT “ (back to the beginning)

3

Press PTY/EON once again.

The preset FM stations appear on the display
with their preset numbers.
The unit searches 30 preset FM stations, stops
when it finds the one you have selected and tunes in that
station.
• If no program is found, the unit returns to the last

received station.

To stop searching any time during the process
Press SELECT + or SELECT – while searching.

Station frequency

(or preset channel no.)

CT

(Clock Time)

PS NAME

(Program Service Name)

RT

(Radio Text)

* The clock time shown on the display is not the

same as CT (Clock Time) sent by the station.

*

Continued

DISPLAY MODE

PTY / EON

SELECT

PTY / EON

EN01-13.CA-MXG51R[B]_f

01.2.15, 8:51 PM

12