English fall prevention, Cable connection, Attachment screws – JVC TK-C205VP User Manual
Page 2: Connecting the safety cable

English
Fall prevention
• The ceiling to mount the camera has to be strong enough to support the weight of this
product.
If the ceiling is not strong enough, make sure to apply reinforcement to the ceiling
before installation.
• Be sure to tighten the screws or nuts securely, Insufficient tightening may cause the
unit to fall from its mount.
• To avoid unforeseen accidents, attach the safety cable. Otherwise, there is nothing to
prevent the camera from falling should it come loose.
8 mm
2 mm
12mm (
15
/
32
")
or less
Seal tape
Safety cable
Pipe
Attachment screws
Use screw size suitable for the mounting
holes (ø5 mm (
3
/
16
")).
Connecting the safety cable
• To prevent dropping, connect the unit to a
sturdy location (ceiling slab or channel)
and safety cable.
• For the used safety cable, pay particular
caution to the length, strength, pull, mate-
rial (insulation), etc.
• Always use the M4 screws mounted on
the unit.
Cable connection
Do not cross the power supply cable and
coaxial cable.
Power Supply cable
Coaxial cable