Settings for external equipment, Connection to external equipment – JVC 0905TNH-FN-FN User Manual
Page 33

33
Reco
rdin
g
EN
If programming has been made at the end of the 
programming (PROG. 1) currently being recorded:
• The timer programming set first (PROG. 2) has 
priority. PROG. 3 will not be recorded.
If the recording time is partially overlapped:
• The timer programming with the earlier start time 
(PROG. 2) has priority. PROG. 1 will start after 
PROG. 2 recording is complete.
If the recording time entirely overlaps:
• The shorter timer programming (PROG. 1) is not 
recorded.
Note for DVD recording
• If the recording time of two programmes overlap, or 
the End time of a programme and the Start time of 
another is same, the first 30 seconds (at the most) 
of the subsequent programme are cut off.
If the End time of the programme currently being 
recorded and the Start time of the subsequent 
programme are same:
• If PROG. 1 is a DVD recorded programme, the 
beginning of PROG. 2 may be cut off.
* If the cut off time exceeds 1 minute, the error
number “E40” will appear in the timer programming 
list.
Settings for External Equipment
Connection to External Equipment
Connect the external equipment using either the input 
jacks, AV1, AV2 (Rear) or AV3 (Front). However, for 
AV3 jacks, you have to select S-VIDEO input or 
VIDEO input jacks depending on the connected 
devices.
Use commercially available Scart, S-Video or Video 
cable and an Audio cable for this connection.
1
In stop mode, press [SET UP].
2
Select “Advanced Setting Menu” 
using [Cursor 
U / D], then press
[ENTER].
If it has already appeared, proceed to step 3.
3
Select “Select Video” using 
[Cursor 
U / D], then press [ENTER].
4
Press [ENTER].
5
Select the input jack type to be used 
using [Cursor 
U / D], then press
[ENTER].
• If you want to use VIDEO input jack (Composite),
select “Video In.”
• If you want to use S-VIDEO input jack, select
“S-Video In.”
6
Press [SET UP] to exit.
PROG. 1
PROG. 2
PROG. 1
PROG. 2
PROG. 3
PROG. 2 
recording 
will start 
after 
PROG. 1 
recording is 
completed.
Actual
recording
Additional 30 seconds (at the most) are cut off.
PROG. 1
PROG. 2
PROG. 2
PROG. 1
Additional 30 seconds (at the most) are cut off.
Actual
recording
PROG. 1
PROG. 2
PROG. 2
Actual
recording
PROG. 1
PROG. 2
PROG. 2
PROG. 1
Actual
recording
The first 30 seconds
(at the most) are cut off.*
DVD-RW
DVD-RW
Video
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
VCR
VCR
VCR
AV3 (Front)
S-Video In
Video In
VCR DVD
E9770ED_EN.book Page 33 Wednesday, August 3, 2005 6:35 PM
