Dynamic range control (default: on), Fast forward with audio (default: on), Press [set up] to exit – JVC 0905TNH-FN-FN User Manual
Page 61: Hint, Set to “on” to make the dynamic range narrower, Your setting is activated, Settings for dts (default: on)

61
C
h
an
gi
n
g
t
h
e S
e
tti
ng
 Me
nu
EN
Note
When playing back a disc with copyright protection:
• Even if you select “96kHz,” the sound is down 
sampled to 48 kHz.
Select a setting using 
[Cursor 
U / D], then press [ENTER].
Your setting is activated.
PCM:
Converts the Dolby Digital into PCM 
(2 channel.)
If your amplifier / decoder is NOT compatible 
with Dolby Digital, set to “PCM.”
Stream: Outputs Dolby Digital signals.
If your amplifier / decoder is compatible with 
Dolby Digital, set to “Stream.”
Hint
When playing back a DVD-RW disc recorded in VR 
mode:
• If the audio source on a disc is in Dolby Digital 
format, set “Dolby Digital” to “PCM” so that you can 
switch to main audio (L), sub audio (R), or a 
combination of both (L / R) using your amplifier / 
decoder.
Select a setting using 
[Cursor 
U / D], then press [ENTER].
Your setting is activated.
PCM:
Converts MPEG into PCM.
If your amplifier / decoder is NOT compatible 
with MPEG, set to “PCM.”
Stream: Outputs MPEG Audio signals.
If your amplifier / decoder is compatible with 
MPEG, set to “Stream.”
Select a setting using 
[Cursor 
U / D], then press [ENTER].
Your setting is activated.
ON: Outputs DTS signals.
If your amplifier / decoder is compatible with 
DTS, set to “ON.”
OFF: No DTS signal is output.
If your amplifier / decoder is NOT compatible 
with DTS, set to “OFF.”
Dynamic Range Control (Default: ON)
Set to “ON” to make the dynamic range narrower.
Select a setting using 
[Cursor 
U / D], then press [ENTER].
Your setting is activated.
The Dynamic Range Control function is effective 
only with analogue audio connection. 
Fast Forward with Audio (Default: ON)
Set to “ON” to output the sound during DVD playback 
at x1.5 fast forward.
Select a setting using 
[Cursor 
U / D], then press [ENTER].
Your setting is activated.
5
Press [SET UP] to exit.
Dolby Digital conversion (Default: Stream)
Settings for MPEG (Default: PCM)
Digital Out - Dolby Digital
PCM
Stream
Stream
Digital Out - Dolby Digital
PCM
Stream
Stream
DVD
Stream
PCM
DVD
Digital Out -
MPEG
-
Settings for DTS (Default: ON)
Digital Out - DTS
ON
Digital Out - DTS
OFF
DVD
ON
Playback
TV Aspect 4:3 Letter Box
Parental Lock All
Disc Menu Language English
Audio Language Original
Subtitle Language OFF
Digital Out
Dynamic Range Control ON
Fast Forward with Audio OFF
Video Out
Dynamic Range Control ON
Playback
TV Aspect 4:3 Letter Box
Parental Lock All
Disc Menu Language English
Audio Language Original
Subtitle Language OFF
Digital Out
Fast Forward with Audio
ON
Video Out
Dynamic Range Control ON
DVD
Dynamic Range Control
ON
OFF
ON
Dynamic Range Control
ON
OFF
ON
DVD
Playback
TV Aspect 4:3 Letter Box
Parental Lock All
Disc Menu Language English
Audio Language Original
Subtitle Language OFF
Digital Out
Dynamic Range Control ON
Fast Forward with Audio OFF
Video Out
Fast Forward with Audio OFF
Playback
TV Aspect 4:3 Letter Box
Parental Lock All
Disc Menu Language English
Audio Language Original
Subtitle Language OFF
Digital Out
Dynamic Range Control ON
Fast Forward with Audio OFF
Video Out
Fast Forward with Audio ON
DVD
Fast Forward with Audio
ON
OFF
OFF
Fast Forward with Audio
OFF
ON
DVD
E9770ED_EN.book Page 61 Wednesday, August 3, 2005 6:35 PM
