JBL CONTROL NOW User Manual

Page 5

4. The mounting bracket is designed to trap the flange of the JBL Control NOW

speaker by securing the mounting-bracket cap with two screws through the
bottom of the mounting bracket. Rest the JBL Control NOW speaker’s rear
flange in the mounting bracket, as shown. This will support the weight of the
speaker. Slide the mounting-bracket cap over the assembly. Secure the
mounting-bracket cap by inserting two #10-32 x 2" screws (provided) in
the bottom of the mounting bracket and tightening.

5. To orient the JBL logo into the correct position, pull the JBL logo slightly

outward from the speaker grille and rotate. The JBL logo is held in place by
a spring. Peel the adhesive cover off the mounting-bracket cover and attach
to the top and bottom of the mounting assembly.

Mounting-Bracket
Cover

Mounting Bracket
shown as looking through
the speaker.

Mounting-Bracket Cap

Mounting Bracket

#10-32 x 2" Screws (2)

Mounting-Bracket Cap

Mounting Bracket

#10-32 x 2" Screws (2)

(side view)

Regardless of whether you choose a vertical or horizontal orientation,
when mounting the JBL Control NOW speaker to a single wall surface, you
should always install the wall-mounting bracket in a vertical orientation.

Bracket Cover

Vertical
orientation

An alternate
vertical orientation
is shown here

Vertical
orientation

JBLP2605_CN_CNAW_PM-OM 4/23/08 12:57 PM Page 5