JBL CONTROL NOW - Manual (Page 18)

CAUTION
The JBL Control NOW PMB Pole-Mount Bracket facilitates installation of the
JBL Control NOW and JBL Control NOW AW loudspeakers with a variety of
general-purpose ceiling-fan-pole assemblies available from many manufacturers.
Since different fan-pole assemblies will have different weight capacities, pole
diameters and mounting systems, it is the customer’s responsibility to check
with the fan-pole-assembly manufacturer or dealer to determine whether that
specific pole-mount assembly is capable of correctly and securely attaching to
the PMB and handling the weight and proportions of these loudspeakers in
a safe and stable manner. JBL, Inc., disclaims any liability for the selection of
fan-pole assemblies and/or correct compatibility between the selected fan-pole
assembly and the JBL Control NOW PMB.
UNPACKING THE BRACKET AND CABLE KIT
Carefully unpack the bracket and cable assembly. If you suspect damage
from transit, report it immediately to your dealer and/or delivery service.
Keep the shipping carton and packing materials for future use. Open the
package and verify the following contents:
SPEAKER IDENTIFICATION CHART
ATTACHING POLE TO POLE-MOUNT BRACKET
(FOR LARGER-DIAMETER DROP TUBES)
1. Run the appropriate wiring down through the drop tube. Slide the drop tube
through the pole-mount-bracket cap.
Pole-Mount-Bracket Cap
Drop Tube
Pole Bushing
(used for
smaller-diameter
drop tubes)
Pole-Mount-Bracket Cap
Clevis Pin
Cotter Pin
Pole-Mount Bracket
(4) #10-32 x 2" Screws
Pole-Mount-Bracket Cover
Cable Assembly
18
FOUR-SPEAKER ARRAY USING THE OPTIONAL POLE-MOUNT BRACKET (PMB)
Included:
JBLP2605_CN_CNAW_PM-OM 4/23/08 12:57 PM Page 18