JVC DLA-RS15 - Manual (Page 37)

ENGLISH
37
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others
Input Signal > Over Scan
18 Over Scan
Selects whether or not to set over scan for the SD video signal.
On Over scan the top, left, bottom and right at 2.5% each.
Off Do not over scan.
●
This setting is not available when HD signal or PC signal is input.
Input Signal > Mask
19 Mask
Masks (Hides) the outer area of the projected image.
2.5% Mask 2.5% of the screen.
5% Mask 5% of the screen.
Off No masking.
●
Masking is available only when high definition images are input.
Input Signal > Film Mode
20 Film Mode
Selects this to view movies shot on film.
Auto
After determining if the picture is 24 frame film or 60 frames (50 frames) video,
changes the setting to the optimal progressive conversion.
Film
Corrects unnatural movement of material pulldown processed from 24 frames to 60
frames (50 frames) and returned to 24 frames.
Off Sets the appropriate progressive conversion for video.
●
Only 480i/576i/1080i may be selected.
●
Select “ Auto ” or “ Off ” if it begins to function improperly. Particularly, with video it does not operate properly.