JVC KD-S100 - Manual (Page 8)

8
ENGLISH
4
MO indicator lights up. Reception
improves, but stereo effect will be
lost.
To restore the stereo effect, repeat the same
procedure and select “Off” in step
3. The MO indicator
goes off.
Tuning in to FM stations with
strong signals only—LO (local)/
DX (Distance-Extreme)
1
Enter the MODE menu (see page 4).
2
3
4
DX indicator goes off and LO
indicator lights up. Only stations
with sufficient signal strength will be
detected.
To tune in to all receivable stations, repeat the
same procedure and select “DX” in step
3. The LO
indicator goes off and DX indicator lights up.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1
Select the FM band (FM1 – FM3) you
want to store into.
Radio operations
~
Ÿ
!
Start searching for a station.
When a station is received, searching stops.
To stop searching, press the same button
again.
To tune in to a station manually
In step ! above...
1
2 Select a desired station frequency.
When an FM stereo broadcast is hard
to receive
1
Enter the MODE menu (see page 4).
2
3
Selected band appears.
EN02-09_KD-S100[J]2.indd 8 EN02-09_KD-S100[J]2.indd 8 8/29/06 2:59:26 PM 8/29/06 2:59:26 PM