beautypg.com

More about this unit, English, Basic operations – JVC KD-S100 User Manual

Page 27: Tuner operations

background image

27

ENGLISH

Continued on the next page

More about this unit

Basic operations

Turning on the power

• By pressing SOURCE on the unit, you can also turn on

the power. If the source is ready, playback also starts.

Turning off the power

• If you turn off the power while listening to a disc, disc

play will start from where playback has been stopped
previously, next time you turn on the power.

Tuner operations

Storing stations in memory

• During SSM search...
– All previously stored stations are erased and

stations are stored newly.

– Received stations are preset in No. 1 (lowest

frequency) to No. 6 (highest frequency).

– When SSM is over, the station stored in No. 1 will

be automatically tuned in.

• When storing a station manually, the previously

preset station is erased when a new station is stored
in the same preset number.

Disc/SD card/USB memory operations

Caution for DualDisc playback

• The Non-DVD side of a “DualDisc” does not comply

with the “Compact Disc Digital Audio” standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product may not be recommended.

General

• This unit has been designed to reproduce CDs/CD

Texts, and CD-Rs (Recordable)/CD-RWs (Rewritable)
in audio CD (CD-DA) and MP3/WMA format; MP3/
WMA files recorded in an SD card or a USB memory.

• While playing an audio CD: If a title has been

assigned to the audio CD (see page 19), it will be
shown on the display.

• While fast-forwarding or reversing an MP3/WMA

track, you can only hear intermittent sounds.

Inserting a disc

• When a disc is inserted upside down, the control

panel moves down, and the disc automatically ejects
from the loading slot.

• If you keep the control panel open for about

1 minute, (beeps sound when the “Beep” setting is
turned “On”—see page 17) the control panel returns
to its previous position.

• Do not insert 8 cm discs (single CD) and unusual

shape discs (heart, flower, etc.) into the loading slot.

Playing a CD-R or CD-RW

• Use only “finalized” CD-Rs or CD-RWs.
• This unit can play back only files of the same type

which are first detected if a disc includes both audio
CD (CD-DA) files and MP3/WMA files.

• This unit can play back multi-session discs; however,

unclosed sessions will be skipped while playing.

• Some CD-Rs or CD-RWs may not play back on this

unit because of their disc characteristics, or for the
following reasons:

– Discs are dirty or scratched.
– Moisture condensation occurs on the lens inside the

unit.

– The pickup lens inside the unit is dirty.
– CD-R/CD-RW on which the files are written with

“Packet Write” method.

– There are improper recording conditions (missing

data, etc.) or media conditions (stained, scratched,
warped, etc.).

• CD-RWs may require a longer readout time since the

reflectance of CD-RWs is lower than that of regular
CDs.

• Do not use the following CD-Rs or CD-RWs:

– Discs with stickers, labels, or protective seal stuck to

the surface.

– Discs on which labels can be directly printed by an

ink jet printer.

Using these discs under high temperatures or high

humidities may cause malfunctions or damage to the
unit.

EN24-29_KD-S100[J]2.indd 27

EN24-29_KD-S100[J]2.indd 27

8/29/06 2:59:42 PM

8/29/06 2:59:42 PM