JVC KD-S100 - Manual (Page 20)

20
ENGLISH
Satellite radio operations
This unit is satellite (SAT) Radio Ready—compatible
with both SIRIUS Satellite radio and XM Satellite radio.
Before operating your satellite radio, refer also to the
Instructions supplied with your SIRIUS Satellite radio or
XM Satellite radio.
• “SIRIUS” and the SIRIUS dog logo are registered
trademarks of SIRIUS Satellite Radio Inc.
• XM and its corresponding logos are registered
trademarks of XM Satellite Radio Inc.
• “SAT Radio,” the SAT Radio logo and all related marks
are trademarks of SIRIUS Satellite Radio Inc., and XM
Satellite Radio, Inc.
Listening to the satellite radio
Connect either one of the following (separately
purchased) to the CD changer jack on the rear of this
unit.
• JVC SIRIUS radio DLP—Down Link Processor, for
listening to the SIRIUS Satellite radio.
• XMDirect TM Universal Tuner Box—Using a JVC
Smart Digital Adapter (XMDJVC100: not supplied), for
listening to the XM Satellite radio.
GCI (Global Control Information) update:
• If channels are updated after subscription, updating
starts automatically.
The following appears and no sound can be heard.
– For SIRIUS Satellite radio: “Channels Updating
XX%* Completed”
– For XM Satellite radio: “UPDATING”
• Update takes a few minutes to complete.
• During update, you cannot operate your satellite
radio.
* Changes every 20% of update is completion, (ex. 20%,
40%, 60%).
Activate your SIRIUS subscription after
connection:
1
2
JVC DLP starts updating all the SIRIUS channels.
Once completed, JVC DLP tunes in to the preset
channel, CH184.
3 Check your SIRIUS ID, see page 16.
4 Contact SIRIUS on the internet at
to
activate your subscription, or you can call
SIRIUS toll-free at 1-888-539-SIRIUS (7474).
“Subscription Updated Press Any Key to Continue”
appears on the display once subscription has been
completed.
Activate your XM subscription after
connection:
• Only Channel 0, 1, and 247 are available before
activation.
1
2
XMDirect TM Universal Tuner Box starts updating
all the XM channels. “Channel 1” is tuned in
automatically.
3 Check your XM Satellite radio ID labelled on
the casing of the XMDirect TM Universal Tuner
Box, or tune in to “Channel 0” (see page 22).
EN16-23_KD-S100[J]2.indd 20 EN16-23_KD-S100[J]2.indd 20 8/29/06 2:58:41 PM 8/29/06 2:58:41 PM