JVC UX-P400 - Manual (Page 23)

21
Timer Operations
Setting the Timer
Using Daily Timer, you can wake up with your favorite
song. On the other hand, with Recording Timer, you can
make a tape of a radio broadcast automatically.
• You can store three Daily Timer settings and one
Recording Timer setting; however, you can activate only
one of Daily Timers and Recording Timer at the same time.
• To exit from the timer setting, press CLOCK/TIMER as
required.
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
1
Select one of the timer setting modes you want to set—
Daily 1 ON time, Daily 2 ON time, Daily 3 ON time, or
Recording Timer ON time.
2
Make the timer setting as you want.
For Daily Timers:
1
Set the hour then the minute for on-time.
2 Select the playback source—“TUNER,” “CD,” or
“TAPE.”
4/¢
STANDBY/ON
CLOCK/
TIMER
SET
CANCEL
Remote control
* Daily Timer initial settings when shipped from the
factory
•Daily 1: ON Time (6:00)/Source (TUNER)/
Volume level (8)
•Daily 2: ON Time (7:00)/Source (TUNER)/
Volume level (8)
•Daily 3: ON Time (10:00)/Source (TUNER)/
Volume level (8)
Remote
ONLY
CLOCK/
TIMER Daily 1 * ON (Time) ON (Time) ON (Time)
ON (Time)
Daily 2 * Daily 3 *
REC Clock setting
(see page 12)
Canceled
Daily 1 Timer Daily 2 Timer Daily 3 Timer
Recording Timer
1
Ex. When Daily Timer 1 setting mode is selected
SET
SET
1
Timer.fm Page 21 Sunday, January 18, 2004 6:55 PM