JVC UX-P400 - Manual (Page 12)

10
To select a track
To select a group (MP3 only)
Before starting playback...
Group number and group name appear.
To locate a particular portion
While playing a disc, press and hold until the portion you
want is reached.
To locate a track directly and start play
Playing Back a Tape
To insert a tape
You can play back tapes of types I, II, and IV.
To change the tape running direction
To reverse the tape automatically
To start: To pause: To stop:
To release, press again.
Examples:
To select track number 5, press
5.
To select track number 15, press
+10, then 5.
To select track number 30, press
+10, +10, then 10.
Decreases the track numbers.
Increases the track numbers.
Remote
ONLY
GROUP UP
GROUP DOWN
Increases the group numbers.
Decreases the group numbers.
PRESET UP
PRESET DOWN
Fast-forwards the track.
Fast-reverses the track.
1
4
7
10
2
5
8
3
6
9
10
To start: To stop:
To rewind tape:
Before or after play...
Tape is played from the forward side to the
reverse side. When the reverse side is played
back, playback stops.
Tape is automatically reversed, and playback
repeats until you stop it.
Tape will not be reversed. When the current
side of the tape reaches its end, playback stops.
Push Insert Close
With the tape side facing outside
Rewind the tape to the right.
Rewind the tape to the left.
3 (forward play)
2 (reverse play)
REV.
MODE
Basic.fm Page 10 Sunday, January 18, 2004 6:56 PM