JVC RX-772VBK User Manual

Page 37

Page 34

Selecting the Surround Modes

(Also see pages 24)

1. Press MENU.

The MAIN MENU appears on the TV.

2. Press

% / fi

fi to move

to “SURROUND,” then press

@ / #

The SURROUND MODE menu appears.

3. Press

% / fi

fi to move

to one of the surround modes.

If you want to adjust the selected mode, go to the following steps.

4. Press MENU.

The MAIN MENU appears on the TV again.

5. Press

% / fi

fi to move

to “SURROUND ADJUST,” then press

@ / #

The adjustment menu for the mode you have selected in step 3 appears.

6. Press

% / fi

fi to move

to the item you want to set or adjust, then press

@ / #

On these adjustment menus, you can do the following:

For HALL:

“REAR”:

Adjust the rear speaker output level.

“DELAY”:

Adjust the delay time of the rear speaker sound.

For Dolby Pro Logic:

“CENTER MODE”:

Select the center mode.

“TEST”:

Output a test tone.

“CENTER”:

Adjust the center speaker output level.

“REAR”:

Adjust the rear speaker output level.

“DELAY”:

Adjust the delay time of the rear speaker sound.

“CENTER TONE”:

Select the center tone.

For Dolby 3ch Logic:

“CENTER MODE”:

Select the center mode.

“TEST”:

Output a test tone.

“CENTER”:

Adjust the center speaker output level.

“CENTER TONE”:

Select the center tone.

7. When you finish, press MENU EXIT.

The menu disappears from the TV.

PRO LOGIC adjustment menu

3CH LOGIC adjustment menu

HALL adjustment menu

SURROUND MODE menu

RX-772VBK[J]_0052-001A.En.31-37

97.4.8, 3:27 PM