JVC KD-DV5400 - Manual (Page 7)

ENGLISH
7 INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also page 28.
1 Turn on the power.
2 Enter the PSM settings.
3 Cancel the display demonstrations
Select “DEMO,” then “DEMO OFF.”
Set the clock
Select “CLOCK HOUR,” then adjust the hour.
Select “CLOCK MIN” (minute), then adjust the minute.
4 Finish the procedure.
When the power is turned off: Check the current clock time
When the power is turned on: Change the display information
EN02-07_KD-ADV5490[J]3.indd 7 EN02-07_KD-ADV5490[J]3.indd 7 10/31/07 9:30:07 AM 10/31/07 9:30:07 AM