JVC KD-DV5400 - Manual (Page 12)

ENGLISH
12
Change the display information.
Clock
= Station name * =
Frequency = (back to the beginning)
• If no title is assigned to a station,
“NO NAME” appears. To assign a title
to a station, see page 32.
When an FM stereo broadcast is
hard to receive
Reception improves, but stereo effect will be lost.
• “MO” lights up on the display.
To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO indicator
goes off.
Listening to the radio
1 Select “FM/AM.”
2 Select the bands.
3 Search for a station to listen—Auto Search.
Manual Search: Hold either one of the buttons until “M” flashes on the display, then press
it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, “ST” lights up
on the display.
FM station automatic presetting
— SSM (Strong-station Sequential
Memory)
You can preset up to six stations for each band.
1
While listening to an FM station...
2
Local FM stations with the strongest signals are
searched and stored automatically in the selected
FM band.
Manual presetting
Ex.: Storing FM station of 92.50MHz into preset number
4 of the FM1 band.
1
2
EN08-13_KD-ADV5490[J]1.indd 12 EN08-13_KD-ADV5490[J]1.indd 12 10/17/07 4:24:42 PM 10/17/07 4:24:42 PM