JVC AV 27430 - Manual (Page 13)

Please follow the flow chart below to determine which connection setup is right for you. Then,
refer to the appropriate diagrams to connect your television to other devices that you may
have. After you are finished connecting your devices, plug the power cord into the nearest
power outlet and turn on the TV.
Step 2 – Connecting Your Devices
13
A VCR is not necessary for operation of the television. If you follow these diagrams and the
television does not work properly, contact your local cable operator.
• To connect a DVD player, see
Diagram #3. A DVD player is optional.
• If you have a satellite television system, please refer to the satellite TV manual.
Basic Operation
Turn the television on and off by pressing the P
OWER
button at the top right
corner of the remote. If this is the first time you are turning on the TV, the
interactive plug-in menu appears.
• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if
you need to operate a cable box. (Except RM-C203)
• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to
DVD to control a DVD player. Please see pages 20 to 23 for instructions on
programming your remote control to operate a cable box, VCR or DVD player.
(Except RM-C203)
Quick Setup Connections
FE2,GE2 English OK 2/18/03, 1:40 PM 13